Renewing Crankshaft Oil Seal (Pulley End) - Audi A8 2003 Workshop Manual

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
Sealing flange (pulley end) - tightening torque and sequence
– Tighten bolts for sealing flange (pulley end) -arrow- in diagonal
sequence and in stages to 9 Nm.
2.6 Renewing crankshaft oil seal (pulley
end)
Special tools and workshop equipment required
♦ Oil seal extractor - T40019-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Assembly tool - T40048 A-
Audi A8 2003 ➤
2. Servicing work on pulley end
65