Renewing Oil Seal For Power Steering Pump Drive - Audi A8 2003 Workshop Manual

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
11 - Flat-section O-ring
❑ Installation position
12 - Bolt
❑ Tightening torque ⇒ Rep. gr. 48
13 - Power steering pump
❑ Removing and installing ⇒ Rep. gr. 48
14 - Oil pump drive shaft
15 - Circlip
16 - Thrust washer
17 - Shaft for drive spur gear
18 - Drive spur gear
❑ For auxiliary drives
❑ Cannot be renewed separately
19 - Drive chain sprocket
❑ For auxiliary drives
Installation position of flat-section O-ring
♦ In power steering pump drive -arrow-.
1.11 Renewing oil seal for power steering
pump drive
Special tools and workshop equipment required
♦ Used oil collection and extraction unit - V.A.G 1782- or -VAS
6622A-
⇒ page 145
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
145
1. Chain drive