Renewing Oil Seal For Toothed Belt Drive Sprocket - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Fit new oil seal -1- with guide sleeve - T10122/2- onto crank‐
shaft.
– Press in the oil seal with thrust sleeve -T10122/3- evenly so
that it is flush all round.
– Install drive plate ⇒ page 71
3.4

Renewing oil seal for toothed belt drive sprocket

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
74
Rep. gr.13 - Crankshaft group
.