Audi A8 2003 Workshop Manual page 30

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Unscrew clamp -1-.
– Unscrew retaining nut -2- for track rod cover.
– Unplug electrical connector -2-.
– Unbolt earth cable -1- at longitudinal member.
– Unbolt bracket for wiring harness from longitudinal member
-arrows-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Move electrical wiring harness clear.
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unplug electrical connector -2- at vehicle level sender.
– Detach coupling rod -1- at track control link.
– Repeat procedure on other side of vehicle.
– Unbolt cross piece (front) -arrows-.
24
Rep. gr.10 - Removing and installing engine