Throttle Body And Intake Manifold - Suzuki RA410 Manual

THROTTLE BODY AND INTAKE MANIFOLD

13 23 N·m (2.3 kg-m)
: Tightening Torque
: Do not reuse
9
3
12 10 N·m (1.0 kg-m)
REMOVAL
1) Relieve fuel pressure according to procedure described in p.
6-4.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
1. Radiator
2. Drain plug
4) Remove air cleaner assembly, resonator and their hoses as
1
previously outlined.
5) Disconnect accelerator cable (1).
16
17
15
10. IAT sensor
14
11. PCV valve
12. Intake manifold nut
13. Stiffener bolt
14. EGR valve
15. EGR back pressure transducer
16. EGR solenoid vacuum valve
17. EVAP canister purge valve
ENGINE MECHANICAL 6A4-15
1. Intake manifold
2. Throttle body
3. Gasket
4. Fuel pressure regulator
5. Fuel delivery pipe
6. Fuel injector
7. Upper stiffener No.1
8. Upper stiffener No.2
9. MAP sensor
(if equipped)