Routing Information Protocol; Chapter Conventions - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

C 22
HAPTER
This chapter covers the Routing Information Protocol (RIP) configuration used in
the OA-700. It provides a broad overview on RIP V1 and V2 configuration
including the timer, authentication, default route, and monitoring commands.
For a detailed information on the RIP commands, refer to the RIP chapter in the
OmniAccess 700 CLI Command Reference Guide.
This chapter includes the following sections:
•
"RIP Overview"
•
"RIP Configuration"
The "RIP Overview"
can skip this section, and directly go to the configuration section of this chapter
detailed in "RIP
C C
HAPTER ONVENTIONS
Acronym
SUM
CM
RCM
ICM
RIP
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
R I
OUTING NFORMATION
section serves only as an additional information on RIP. You
Configuration".
Super User Mode - ALU#
Configuration Mode - ALU (config)#
Router Configuration Mode - ALU (config-router rip)#
Interface Configuration Mode - ALU (config-interface name)#

Routing Information Protocol

Alcatel-Lucent
Routing Information Protocol
P
ROTOCOL
Description
Beta
467