Dead Peer Detection (Dpd) - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
IP Security - Virtual Private Network
D P D
EAD EER ETECTION
DPD enables IPsec to identify the loss of peer connectivity. It helps to recognize
black holes as soon as possible and recover lost resources.
By default, DPD is turned off. A global configuration is available so that all
connections follow the same DPD configuration. Each connection can override
the global DPD configuration by specifying its own DPD policy in its crypto map.
T DPD G
O CONFIGURE LOBALLY
crypto ike dpd interval <5-
3600> [timeout <5-72000>]
no crypto ike dpd
E
XAMPLE
ALU(config)# crypto ike dpd interval 10 timeout 35
ALU(config)# no crypto ike dpd
774
Beta
(DPD)
Command (in CM)
Alcatel-Lucent
Description
This command configures the DPD
globally with the interval in seconds for
which the keep-alive messages will be
sent, and the time-out in seconds after
which the peer will be declared to be
dead.
The default value for DPD time-out is
three times that of the DPD interval
specified.
This command disables DPD for IPsec
globally.
CLI Configuration Guide
Beta