Protocol Independent Features; Chapter Conventions - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

C 21
HAPTER
This chapter describes configuration of the IP routing protocol-independent
features. Refer to the following sections to configure Protocol Independent
features on your system:
•
"Protocol-Independent Configuration"
•
"Protocol-Independent Configuration Commands"
For instructions on using the commands and descriptions on each of their
parameters with the corresponding default values, refer to the OmniAccess 700
CLI Command Reference Guide.
C C
HAPTER ONVENTIONS
Acronym
UM
SUM
CM
RCM
Route map CM
Standard IP
Access list CM
Extended IP
Access list CM
ICM
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
P I
ROTOCOL NDEPENDENT
User Mode - ALU>
Super User Mode - ALU #
Configuration Mode - ALU (config)#
Router Configuration Mode - ALU (config-router ospf)#
Route Map Configuration Mode -ALU (config-route-map)#
Configuration Mode - ALU (config-std-nac1)#
Configuration Mode - ALU (config-ext-nac1)#
Interface Configuration Mode - ALU (config-if)#
Alcatel-Lucent

Protocol Independent Features

F
EATURES
Description
Beta
439