Frame Relay Configuration Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Frame Relay
F R C
RAME ELAY ONFIGURATION
This section provides details about the commands that are used in configuring
Frame Relay encapsulation.
T E FR E
O NABLE NCAPSULATION ON AN
This command is entered in the Interface Configuration mode.
encapsulation frame-relay
no encapsulation frame-relay
E
XAMPLE
ALU(config-if Serial 0/0:0)# encapsulation frame-relay
ALU(config-if Serial 0/0:0)# no encapsulation frame-relay
Note: If the encapsulation of a serial interface is changed to FR, the QoS policy will be
detached from the interface if the depth of the QoS policy is more than three, after
giving a warning message. You have to decrease the policy depth to less than or
equal to three, and explicitly attach the policy to the interface.
302
Beta
C
OMMANDS
I
NTERFACE
Command (in ICM)
Alcatel-Lucent
Description
This command is entered in the Interface
Configuration mode.
This command is used to set
encapsulation on an interface to Frame
Relay.
The "no" command resets the
encapsulation to its default.
The default encapsulation on a serial
interface is HDLC.
CLI Configuration Guide
Beta