Show Commands In Pbr - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

S C
HOW OMMANDS IN
T V IP P D
O IEW OLICY ETAILS
Command (in SUM/CM)
show ip-policy [<name>]
E
XAMPLE
ALU(config)# show ip-policy
!
! IP-Policy configuration
!
ip-policy pbr1
10 match any m1 m2 interface GigabitEthernet3/0 next-hop
1.2.2.1
exit
!
interface GigabitEthernet3/1
ip-policy pbr1
exit
T V IP P S
O IEW OLICY TATISTICS
Command (in SUM/CM)
show ip-policy statistics
[<ip-policy name>]
E
XAMPLE
ALU(config)# show ip-policy statistics
PBR - Policy Based Routed, Drop - Dropped
0 packets forwarded by best effort IP forwarding
ip-policy pbr1 : PBR - 0 Drop - 0
CLI Configuration Guide
Beta
PBR
0 hits on : 1 match any m1 next-hop 1.1.1.1
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
This command is used to view all the IP
policies configured in the system.
This command is also used to view the
details of a specific IP policy.
This command also displays interfaces
on which these policies are applied.
Description
This command is used to display the
statistics of all the IP policies configured
in the system.
If a policy-name is specified, then the
statistics for the specified IP policy are
displayed.
This displays the number of packets that
hit the rules in the IP policy, and number
of packets dropped.
PBR Configuration
585
Beta