Cli Modes; Configuration Modes - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

CLI M
ODES
Each mode has a specific set of commands and you can navigate between the
modes using a specific set of commands.
End / Ctrl-Z
Exit
Router Configuration Mode
This mode is accessed from
the CM. Enters into a specific
application. For ex: BGP, RIP,
OSPF, Firewall, Filter, NAT,
IPSec, Time-Range etc.
Figure 1: Configuration Modes
CLI Configuration Guide
Beta
LOGIN
User Mode (UM)
Router>
Super User Mode (SUM)
Router#
Router# Config t
Configuration Mode (CM)
Router(Config)#
Application
(RCM)
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
•Show Commands
•Monitor Command
•Ping and ssh
•Enter SUM
Router>en
•Reset Counters
•Clear Commands
•Debug Commands
•Enter Config-mode
Interface
Interface Configuration Mode
(ICM)
This mode is accessed from
the CM. Many features are
enabled on a per-interface
basis. ICM commands modify
the operation of an interface.
Sub-Interface Configuration
Mode (S-ICM)
This mode is accessed from
Interface Configuration Mode
This is a sub-mode of the ICM.

CLI Modes

End / Ctrl-Z
Exit
End / Ctrl-Z
Exit
15
Beta