Example - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

[no] logging watermark <100-
10000>
[no] service timestamps log
terminal monitor <0-7>
clear logging
E
XAMPLE
ALU(config)# logging on
ALU(config)# logging buffered priority 5
ALU(config)# logging remote 1.1.1.1 priority 5
ALU(config)# logging console priority 5
ALU(config)# logging system
ALU(config)# logging watermark 10000
ALU(config)# service timestamps log
ALU(config)# terminal monitor
ALU(config)# clear logging
CLI Configuration Guide
Beta
Command (in CM)
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
System Logging and Debugging
Description
This command is used to set a
watermark level (in terms of number of
log messages) up to which the log
messages get stored.
This command is used to display the
date and time of the log messages.
By default, Service timestamps log is
enabled.
This command displays log messages of
the given priority and higher on a
terminal that has been launched through
SSH or Telnet.
This clears the contents of the logging
buffer.
82
Beta