Configuration Example Of Lfi On Fr - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

C E
ONFIGURATION XAMPLE OF
The following example illustrates the configuration of LFI on a FR interface.
In the following example, the goal is to configure LFI by configuring fragment size
on FR on OA700-R1 and OA700-R2 so that the serialization delay of 10 ms on
serial 0/0 interfaces is achieved.
Figure 1: LFI Configuration on FR
On OA700-A
a) Configure Serial interface. Set FR encapsulation and configure DLCI on the
interface.
ALU-1(config)#controller T1 0/0
ALU-1(config-controller T1)#channel-group 0 timeslots 1
ALU-1(config-controller T1)#exit
ALU-1(config)#
ALU-1(config)#interface Serial 0/0:0
ALU-1(config-if Serial0/0:0)#no shutdown
ALU-1(config-if Serial0/0:0)#ip address 2.2.2.1/24
ALU-1(config-if Serial0/0:0)#encapsulation frame-relay
ALU-1(config-if Serial0/0:0)#frame-relay interface-dlci 100
b) Configure policy map. Associate match-list and class map with the policy map.
ALU(config)# match-list m1
ALU(config-match-list-m1)# tcp any any
ALU(config)# class-map c1
ALU(config-qos-c1)# match m1
ALU(config)# policy-map P1
ALU(config-qos-P1)# class C1
ALU(config-qos-P1-C1)# priority
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
LFI FR
ON
Alcatel-Lucent
LFI Configuration on FR
405
Beta