Part Iv - Packet Classification; Partv - Routing Protocols - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
CLI Configuration Guide
P IV - P C
ART ACKET
This part consists of Chapter 20
configuring the Common Classifier commands. These commands are generic
across all applications. You are required to have a thorough knowledge of this
chapter before you proceed to configure the NATs, Filters, etc. This chapter
provides a concise overview on the concepts of creating rules, match-lists, lists,
etc.
P V - R P
ART OUTING
The aim of the fourth part is to get the most out of addressing and routing. The
routing function moves data through the network efficiently and finds new paths
when network changes occur. Routing also affects how large the network can
grow - that is, the complexity of the topology and the stability of the network as it
expands.
All the chapters in this part focus on configuring the routing services.
Chapter 21
generic across all routing protocols. You are required to have a thorough
knowledge of this chapter before you proceed to configure the routing protocols.
Chapter 22
Protocol" and Chapter 24
commands for configuring RIP, BGP and OSPF routing protocols.
Chapter 25
OA-700.
Chapter 26
configuration on the OA-700.
Chapter 27
Forwarding Customer Edge (VRF-CE) configuration on the OmniAccess-700.
VRF-CE is a feature that enables a service provider to support two or more VPNs,
where IP addresses can be overlapped among the VPNs.
4
Beta
LASSIFICATION
"Common Classifiers"
ROTOCOLS
"Protocol Independent Features"
"Routing Information Protocol"
"Open Shortest Path First"
"Multicast Routing" provides Multicast routing configuration on the
"Policy Based Routing"
"Virtual Routing and Forwarding"
Alcatel-Lucent
that focuses on
provides commands that are
and Chapter 23
provides configuration
covers the Policy Based Routing (PBR)
covers the Virtual Routing and
"Border Gateway
CLI Configuration Guide
Beta