Example 1; Example 2; Example 3; Example 4 - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

E 2
XAMPLE
The following example shows messages of priority 3 or higher.
ALU
> show logging priority 3
2005 Oct 13 04:41:30:%MIM-1-LOG:Interface GigabitEthernet7/0,changed state to down
2005 Oct 13 04:41:30: %MIM-1-LOG: Line protocol on Interface
GigabitEthernet7/0, changed state to down
2005 Oct 13 14:13:06: %ntpdate-3-LOG: No server suitable for synchronization found
The following example shows only the messages with priority 3:
ALU
> show logging priority 3 exact
2005 Oct 13 14:13:06: %ntpdate-3-LOG: No server suitable for synchronization found
E 3
XAMPLE
The following example shows messages containing the text "temperature":
ALU
(config)# show logging string temperature
2006 Sep 19 09:59:23: %CM-7-LOG: SCAN chassis temperature 47; setting fan speed to
high succeeded
2006 Sep 19 10:00:59: %ENVAGT-4-LOG: EA.7: Cannot read temperature sensor
E 4
XAMPLE
The following example shows messages from a particular module, say, CLI:
ALU
> show logging tag cli
2005 Oct 13 03:49:59: %CLI-6-LOG: User: successfully entered into Super user mode
2005 Oct 13 10:44:47: %CLI-6-LOG: A Client Logged in to the Box through SSH from
10.91.2.87
2005 Oct 13 10:45:41: %CLI-6-LOGSRV: Logging buffer size set to 128K by
User:privileged user.
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
System Logging and Debugging
Beta
84