Snmp Configuration Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

SNMP C
ONFIGURATION
The following commands are used to enable and configure SNMP in OA5510-TE.
T E /D SNMP S
O NABLE ISABLE
snmp enable
snmp disable
E
XAMPLE
ALU(config)# snmp enable
ALU(config)# snmp disable
T C SNMP A
O ONFIGURE
snmp agent {rocommunity
|rwcommunity} <community-string>
no snmp agent {rocommunity
|rwcommunity}
E
XAMPLE
ALU(config)# snmp agent rocommunity private
ALU(config)# no snmp agent rocommunity
CLI Configuration Guide
Beta
C
OMMANDS
ERVICE
Command (in CM)
C
GENT OMMUNITY
Command (in CM)
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
SNMP (Simple Network Management Protocol)
Description
This command is used to enable the
SNMP service.
This command is used to disable the
SNMP service.
Description
This command configures the SNMP
agent read-only/read-write
community.
This command removes read-only/
read-write community string
configured on the SNMP agent.
121
Beta