Switching Configuration Using Oa-700; As A Switch With No Vlans - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Layer 2 Switching Configuration
S C
WITCHING ONFIGURATION USING
When no VLANs are configured on the L2 ports, all ports of the switch belong to
one broadcast domain. All the L2 ports participate in pure bridging.
OA-700 S
AS A WITCH WITH NO
The topology consists of the following components:
•
1 OA-700
•
6 PCs/Laptops
Figure 9: Switching with no VLANs
P
ROCEDURE
By default, all Switch ports will be in bridged mode. They belong to 1 broadcast
domain.
ALU(config)# interface switchport1/0
ALU(config-if switchport1/0)#
ALU(config-if switchport1/0)# no shutdown
To check for reachability between hosts, verify with ping from, say Host 1 to Host
5.
180
Beta
OA-700
VLAN
S
Alcatel-Lucent
CLI Configuration Guide
Beta