Ethernet Interface Show Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

E I
THERNET NTERFACE
T V I C
O IEW NTERFACE ONFIGURATION
Command (in CM/ICM)
show interfaces [<interface-
name>]
E 1
XAMPLE
ALU# show interfaces
loopback1 is up, line protocol is up
Internet address is 55.0.0.35/24
MTU 1500 bytes, BW 0 Kbit, DLY 0 usec,
reliability 0/255, txload 0/255, rxload 0/255
Encapsulation LOOPBACK, loopback not set
Keepalive not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/0/0/0 (size/max/drops/flushes);
Total output drops: (null)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
loopback is up, line protocol is up
Internet address is 11.11.11.11/24
MTU 1500 bytes, BW 0 Kbit, DLY 0 usec, reliability 0/255,
txload 0/255, rxload 0/255
Encapsulation LOOPBACK, loopback not set
Keepalive not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/0/0/0 (size/max/drops/flushes); Total
output drops: (null)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
CLI Configuration Guide
Beta
S C
HOW OMMANDS
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
This command displays traffic and all the
corresponding details of all the interfaces
configured.
If interface name is specified,
corresponding details for a specified
interface is displayed.
Ethernet Configuration
159
Beta