Organization; Parti - Introduction; Part Ii - Lan Interfaces - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
CLI Configuration Guide
O
RGANIZATION
The chapters in the CLI Configuration Guide are organized into seven parts.
P I - I
ART NTRODUCTION
The first part provides an introduction to CLI,
Chapter 2. This is a preparatory chapter that describes the CLI configuration
considerations, tools required, an overview of the Command Line Interface and
procedures that should be performed before the actual configuration.
Chapter 3 "System Configuration and Monitoring"
system level commands required to troubleshoot, monitor, connect the system to
the network. This chapter also includes commands for Inband and Out-of-band
management, setting system parameters, software management, configuration
management, AAA services, SNMP, etc. The various commands described
include SSH, Telnet, show version, update, show environment, show mem, show
proc, etc.
Chapter 4 "Virtual Router Redundancy Protocol"
implementation on the OA-700. It is a method of providing nonstop path
redundancy and gateway redundancy for an enterprise network by sharing
protocol and Media Access Control (MAC) addresses between redundant
gateways.
P II - LAN I
ART NTERFACES
This part introduces the commands and steps to configure the LAN interfaces. It
gives a succinct overview on the Ethernet Interface configuration in Chapter 5
"Ethernet Interfaces on
The Bridging configuration in Chapter 6
deals with the L2 switching Configuration on the OA-700. The chapter is
organized with the L2 switching overview, configuration details in the first few
sections and the configuration scenario in the end to give a real time example for
configuring switching.
Chapter 7 "Per VLAN Spanning Tree +"
switching.
Chapter 8 "Integrated Routing and Bridging"
configuration integrated with routing.
Chapter 9 "802.1X Port-Based Authentication"
IEEE 802.1X port-based authentication on the OA-700.
2
Beta
"The Command Line Interface"
SE".
"Layer 2 Switching Configuration"
details the VLAN commands in
deals with Switching
Alcatel-Lucent
provides an overview of the
details a study on VRRP
describes how to configure
CLI Configuration Guide
Beta
in