Filter Show Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

F S C
ILTER HOW OMMANDS
Use the following show commands to monitor and troubleshoot filter performance
on the OA-700.
T V F C
O IEW ILTERS ONFIGURED
Command (in SUM)
show ip filter [<name>]
E
XAMPLE
a) The following syntax displays the all the filters configured in the system:
ALU# show ip filter
ip filter f1
10 match any m1 permit
20 match any m1 permit
default deny
interface GigabitEthernet7/0 In, Stats Off
ip filter f2
10 match any m2 deny
default deny
interface GigabitEthernet7/0 In, Stats Off
b) The following syntax displays the filter f1's details:
ALU(config-filter-f1)# show ip filter f1
ip filter f1
10 match any m1 permit
20 match any m1 permit
default deny
interface GigabitEthernet7/0 In, Stats Off
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
This command displays the details of all
the filters configured on the system.
If filter name is specified, it displays the
details for the specified filter.
Alcatel-Lucent
Filter Configuration
Description
Beta
659