Frame Relay Overview; Frame Relay Devices; Frame Relay Virtual Circuits - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Frame Relay
F R O
RAME ELAY
FR is a WAN protocol that operates at the physical and data-link layers of the OSI
reference model. This protocol was originally designed for use across ISDN
interfaces but today it is used over a variety of other network interfaces as well.
The following sections provide an overview of the FR encapsulation:
•

"Frame Relay Devices"

•

"Frame Relay Virtual Circuits"

•
"Frame Relay Network Deployments"
F R D
RAME ELAY EVICES
Devices attached to a FR WAN fall into two general categories:
•
DTE - These are considered to be the terminating equipment for a specific
network and typically located on the customer premises.
•
DCE - These are carrier-owned internetworking devices. The purpose of DCE
equipment is to provide clocking and switching services in a network.
F R V
RAME ELAY IRTUAL
FR provides connection-oriented data-link layer communication. This means that
a defined connection exists between each pair of devices and that each such
connection is associated with a connection identifier. This service is implemented
by using the FR virtual circuit, which is essentially a logical connection created
between two DTEs. A virtual circuit provides for a bi-directional communication
path between one DTE device and another, and is uniquely identified by a DLCI.
Virtual circuits are of two types:
•
Switched Virtual Circuits (SVC) - These are temporary connections used in
situations requiring only sporadic data transfer between DTE devices across FR
network. The actual deployment of SVCs is minimal in today's FR network.
•
Permanent Virtual Circuits (PVC) - These are permanently established
connections that are used for frequent and consistent data transfers between DTE
devices across a FR network.
296
Beta
VERVIEW
C
IRCUITS
Alcatel-Lucent
CLI Configuration Guide
Beta