Show Commands In Igmp - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Multicast Routing
S C
HOW OMMANDS IN
T V IGMP G I
O IEW ROUP NTERFACE
Command (in SUM/CM)
show ip igmp groups [<group-
address>] [<interface-name>]
E
XAMPLE
ALU# show ip igmp groups
Interface
GigabitEthernet3/0 224.1.1.1
GigabitEthernet3/1 224.0.1.40
GigabitEthernet3/1 225.5.5.5
T V IGMP I
O IEW NTERFACE
Command (in SUM/CM)
show ip igmp interface
[<interface-name>]
E
XAMPLE
ALU# show ip igmp interface
GigabitEthernet3/0 Internet address 7.7.7.3 Mask 255.255.255.0
Host version 2 Router Version 2
Query Interval = 125
Querier Timeout = 255
Max query response time = 10
Last member query count = 2
Last member query response time = 1000
Access Group set = 0
Number of joins on this interface = 84
Number of leave message on this interface = 7
Querier on this interface = 7.7.7.3
Interface DR is 7.7.7.3
Total groups on this interface
Group 1
568
Beta
IGMP
I
NFORMATION
Group-Address Last-Reporter Uptime
I
NFORMATION
224.1.1.1
Alcatel-Lucent
Description
This command displays all the
multicast groups joined.
You can enter the interface name to
see multicast groups on that interface.
3.3.3.4 0:0:51
5.5.5.5 4:12:42
5.5.5.5 0:0:7
Description
This command displays all interfaces
on which the IGMP is enabled, and
displays configured/default values of
the IGMP interface parameters.
1
Expires(sec:msec)
217:89
147:509
252:620
CLI Configuration Guide
Beta