Show Commands In Ospf - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

S C
HOW OMMANDS IN
OSPF show commands display specific statistics, databases, neighbor
information, OSPF routing table information.
D OSPF U
ISPLAY PDATE
While sending update packets, some packets may not reach antilabor in the first
attempt. OSPF protocol adds those packets in re-transmission lists.
To view list of LSAs waiting to be flooded over a specified interface, use the
following command:
show ip ospf flood-list
[{GigabitEthernet|Serial} <slot/
port>|Loopback <0-14487>]
E
XAMPLE
ALU# show ip ospf flood-list
OSPF Router with ID (1.1.1.2) (Process ID 1)
Interface GigabitEthernet 7/0, Queue length 1
Type LS ID
1 1.1.1.2
ALU#
CLI Configuration Guide
Beta
OSPF
P P
ACKET ACING
Command (in SUM)
ADV RTR
1.1.1.2
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Displays a list of LSAs waiting to be
flooded over an interface.
Seq NO Age
0x8000001D 0
OSPF Configuration
Description
Checksum
0x04EA
533
Beta