Nat Debug Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Network Address Translation
NAT D C
EBUG OMMANDS
This section lists the debug commands in NAT.
T E /D D
O NABLE ISABLE EBUGGING ON
Command (in SUM)
debug firewall
{session|filter|nat|attack|alg
|intrusion|selector [saddr
<ip-address>|daddr <ip-
address>|protocol <number> |
sport <number>|dport
<number>][output|permanent]|
all [detail-level]}
no debug firewall
{session|filter|nat|attack|alg
|intrusion|selector [saddr
<ip-address>|daddr <ip-
address>|protocol <number> |
sport <number>|dport
<number>][output|permanent]|
all [detail-level]}
Notes: 1. saddr == source address
2. daddr == destination address
3. sport == source port
4. dport == destination port
E
XAMPLE
ALU# debug firewall nat
640
Beta
NAT
This command turns on the debugging
functionality for NAT on OA-700.
Use this command to turn off the
debugging functionality for NAT.
Alcatel-Lucent
Description
CLI Configuration Guide
Beta