Firewall Show Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Filter and Firewall
F S C
IREWALL HOW OMMANDS
Use the following show commands to monitor and troubleshoot firewall on your
OA-700.
Note: Show commands can be issued either in the Super User Mode or in the firewall sub-
configuration mode.
T V F P
O IEW IREWALL OLICY
Command (in SUM)
show firewall policy [<name>]
E
XAMPLE
To view the firewall policy details, use the following syntax:
ALU# show firewall policy P1
policy P1
10 match any dos attack P1 drop
interface GigabitEthernet7/0 In
T V A C
O IEW THE TTACK OMPONENTS
Command (in SUM)
show firewall attack [<name>]
E
XAMPLE
The following syntax is used to view the details of attack A1:
ALU# show firewall attack A1
attack A1
udp-port-loopback
udp-flood
tcp-fin-scan
icmp-ip-address-sweep
icmp-dest-unrch-storm
icmp-ping-flood
tcp-syn-flood
udp-fraggle-attack
688
Beta
D
ETAILS
Alcatel-Lucent
Description
This command is used to view all the
firewall policy details configured.
This command is also used to view the
details of a specific firewall policy.
Description
This command is used to view all the
DoS attacks details.
This command can also be used to view
the details of a specific attack object
10 1000
200 1000
- -
2 10
2 10
2 10
100 1000 5
- -
CLI Configuration Guide
Beta