System Hardware Information; Example - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Release versions: 2.2, 2.2-r02, 2.3

Hide thumbs Also See for OmniAccess 700:

Table of Contents

The show chassis command provides a physical inventory of the chassis'

components, including parts that are in meta-slots (i.e., not line cards). Generally,

it depicts the static information about the hardware configuration. The command

can be used for a specific slot or to view information for the entire chassis.

The command reports on the pluggable as well as non-pluggable (front panel)

components of the system. These reports are available in common format. This

command is available at all configuration modes.

Command (in SUM)

show chassis [slot <0-31>]

The first example is a typical card report. In this case, the switch card is in slot 24.

ALU> show chassis slot 24

Physical inventory at Thu Dec 11 19:06:36 2008

SC - Switch card (active)

Slot number: 24

Part number: 902613-90

Manufacturer:

Description: Switch card

Serial number:

LoL firmware version: 2.2.68

Loader version: 2.33

ALU-OS version: 2.3.1.30

CLI Configuration Guide

DD0504001023

Alcatel-Lucent

Except on the first page, right running head:

Heading1 or Heading1NewPage text (automatic)

System Monitoring and Troubleshooting

This command provides a physical

inventory of the chassis components for

a specific slot or for the entire system. It

does not indicate the liveness of the

elements listed.

Troubleshooting