Per Vlan Spanning Tree; Chapter Conventions - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

C 7
HAPTER
This chapter documents the commands for bridging configuration. These
commands are used to configure the Per VLAN Spanning Tree Protocol Plus
(PVST+). For a more detailed information on the parameter descriptions and their
corresponding default values, refer to the OmniAccess 700 CLI Command
Reference Guide.
This chapter includes the configuration steps, CLI syntax with its description and
configuration examples. The commands are described in sequential order of
configuration.
This chapter is divided into the following sections:
•
"Per VLAN Spanning Tree (PVST+) Overview"
•
"PVST+ Configuration"
•
"PVST+ Configuration Examples"
C C
HAPTER ONVENTIONS
Acronym
SUM
CM
ICM
CLI Configuration Guide
Beta
P VLAN S
ER PANNING
Super User Mode - ALU#
Configuration Mode - ALU (config)#
Interface Configuration Mode - ALU (config-interface name)#
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
T
REE
Description

Per VLAN Spanning Tree +

+
183
Beta