Mlppp Show Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

MLPPP S C
HOW OMMANDS
T V MLPPP C
O IEW ONFIGURATION
Command (in SUM/CM/ICM)
show interfaces mlppp <1-256>
show mlppp <1-256>
E
XAMPLE
ALU(config)#show interfaces mlppp 10
mlppp10 is up, line protocol is up
Internet address is 1.11.1.1/24
MTU 1494 bytes, BW 128 Kbit, DLY 0 usec,
reliability 255/255, txload 237/255, rxload 0/255
Encapsulation mlppp, loopback not set
IPCP:
Last input never, output never, output hang never
Last clearing of "show interface" counters never
0 packets input (0 Control packets, 0 Data packets), 0 bytes
0 packets output (0 Control packets, 0 Data packets), 0 bytes
0 packets dropped, 0 giants received
Fragmentation: Fragment Delay 0 ms
0 fragmented, 0 couldn't fragment
0 fragments created, 0x0 sent sequence
Reassembly: Slippage MRU 32
0 fragments in reassembly list
0 lost fragments, 0 reordered
0 discarded fragments, 0 reassembled
0 lost received, 0 couldn't reassemble
0 fragments received, 0x0 received sequence
ALU(config)# show mlppp 10
MLPPP bundle 10 link state information:
IPCP:
MEMBER LINKS
Serial0/0:1
Serial0/0:0
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Initial
Open
LCP AUTH CLIENT AUTH SERVER
Open -----
Open -----
Alcatel-Lucent
MLPPP Configuration
Description
Displays the configuration of the MLPPP
bundle interface specified.
Displays the PPP status on the member
links of the specified MLPPP bundle
interface.
Beta
357