C
28
HAPTER
After you install the OA-700, use the CLI to configure the system for Network
Address Translation (NAT). This chapter includes steps for configuring the Source
NAT (SNAT) and Destination NAT (DNAT).
For instructions on using the NAT commands and descriptions on each of their
parameters, refer to the "NAT CLI Commands" in the OmniAccess 700 CLI
Command Reference Guide.
This chapter includes the following sections:
•
"NAT Overview"
•
"Source NAT Configuration"
•
"Destination NAT Configuration"
C
C
HAPTER
ONVENTIONS
Acronym
UM
SUM
CM
ICM
NAT
NAPT
NCM
PAT
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
N
A
ETWORK
DDRESS
User Mode - ALU >
Super User Mode - ALU #
Configuration Mode - ALU (config)#
Interface Configuration Mode - ALU (config-interface name)#
Network Address Translation
Network Address Port Translation
NAT Configuration Mode - ALU (config-nat name)#
Port Address Translation
Alcatel-Lucent
Network Address Translation
T
RANSLATION
Description
Beta
613