Sample Configuration Example Of Dnat On - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

T T O S
O URN N TATISTICS ON AN
ip nat statistics {in|out|both}
E
XAMPLE
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)# ip nat statistics out
S C
AMPLE ONFIGURATION
The following DNAT example illustrates that any ingress HTTP traffic at the
external interface GigabitEthernet7/0 with destination IP address 201.176.18.1
will have that destination address translated to 14.1.1.1 or 14.1.1.2, and
destination port translated to 8080. This is used in a typical web server farm load
balancing situation:
list
match-list m1
tcp
ip nat N1
10 match M1 destination-nat pool p1
match m1 destination-nat pool p1 port 8080
ALU(config-if GigabitEthernet7/0) ip nat in n1
CLI Configuration Guide
Beta
I
NTERFACE
Command (in ICM)
E DNAT
XAMPLE OF
p1 host 14.1.1.1
any host 201.176.18.1 service http
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Destination NAT Configuration
Description
This command turns on statistics
for a given interface.
By default, the interface statistics
is 'off'.
OA-700
ON
host 14.1.1.2
635
Beta