Show Commands In Tf - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

S C
HOW OMMANDS IN
T V TF P D
O IEW OLICY ETAILS
Command (in SUM/CM)
show transparent-forward
[<name>]
E
XAMPLE
ALU(config)# show transparent-forward
!
! Transparent-forward configuration
!
interface GigabitEthernet7/1
transparent-forward interface GigabitEthernet7/0
exit
!
transparent-forward tf
pass-through protocol ipx
exit
!
interface GigabitEthernet7/0
transparent-forward tf interface GigabitEthernet7/1
exit
!
ALU(config)#
CLI Configuration Guide
Beta
TF
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
This command is used to view all the TF
policies configured in the system.
If a TF policy is specified then the details
of the specific TF policy is displayed.
This command also displays the
interfaces on which these policies are
applied.
TF Configuration
861
Beta