Time-Range/Timer Configuration; Time-Range Configuration Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

T - /T
IME RANGE IMER
This section describes configuration of the time-range/timer across various
applications. It is divided into the following sections:
•

"Time-range Configuration Commands"

•
"Time-range Show Command"
T - C
IME RANGE ONFIGURATION
This section lists the commands used in configuring time-range.
T C T -
O ONFIGURE A IME RANGE
time-range <name>
no time-range <name>
Time-range enters the Time-range sub-configuration mode. Here, the time
configured for scheduling is the local time and not the GMT time. Therefore, it has
the option to permit automatic changing to/from daylight savings time.
Note: User must issue "clock" command to set the clock in OA-700, so that the time-range
configuration can take effect precisely.
E
XAMPLE
ALU(config)# time-range t1
ALU(config-time-range-t1)#
ALU(config)# no time-range t1
CLI Configuration Guide
Beta
C
ONFIGURATION
C
OMMANDS
Command (in CM)
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

Time-range/Timer Configuration

Description
This command is used to configure a
time-range object that can be used
across applications.
This command is used to delete a
specific time-range.
709
Beta