The Command Line Interface; Cli Overview - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Release versions: 2.2, 2.2-r02, 2.3

Hide thumbs Also See for OmniAccess 700:

Table of Contents

The Command Line Interface (CLI) is the primary interface to access the OA-700.

The CLI is the interface for console and connections via SSH, Telnet, and Modem.

The CLI, which automatically starts once the required processes on the Switch

Card are up provides commands that you can use to perform various tasks,

including configuring the OA-700, monitoring and troubleshooting the system,

enabling network connectivity, and verifying the system hardware.

This chapter provides an overview of the CLI. For more detailed information on

the CLI syntax and a description on its parameters, refer to the OmniAccess 700

CLI Command Reference Guide.

CLI Configuration Guide

Alcatel-Lucent

Except on the first page, right running head:

Heading1 or Heading1NewPage text (automatic)

The Command Line Interface