Topology - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Per VLAN Spanning Tree +
OA700-2
PVST Global configuration
ALU(config)# spanning-tree priority 2
ALU(config)# spanning-tree vlan 2 priority 3
ALU(config)# spanning-tree vlan 3
ALU(config)# interface switchport0/0
ALU(config-if switchport0/0)# switchport mode hybrid
ALU(config-if switchport0/0)# switchport trunk allowed vlan 2 3
ALU(config-if switchport0/0)# no shutdown
E 2
XAMPLE
Configure PVST+ on OA-700: Spanning Tree provides a mechanism for loop
detection and guarantees only one path exists between two end stations.
Spanning Tree is not turned on by default on L2-GE.
When no VLANs are configured on the L2-ports, all ports of the switch belong to
one broadcast domain. All the L2 ports will participate in pure bridging if they are
not configured for access or trunk or hybrid.
T
OPOLOGY
The topology consists of the following components:
•
1 OA-700
•
6 PCs/Laptops
Figure 13: PVST+ Topology on OA-700
196
Beta
Alcatel-Lucent
CLI Configuration Guide
Beta