Show Commands In Multicast - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

S C
HOW OMMANDS IN
T V F I
O IEW ORWARDING NFORMATION
Command (in SUM/CM)
show ip mroute [<group-address>]
[<interface-name>]
E
XAMPLE
ALU# show ip mroute
IP Multicast Forwarding Information Base
Flags: T - SPT-bit set
(*, 224.1.1.1), uptime 0:10:21, flags:
Rates: Waiting for latest...
Incoming Interface: GigabitEthernet3/1, RPF failures 0
Outgoing Interfaces (1):
GigabitEthernet7/0
(4.4.4.4, 224.1.1.1), uptime 0:30:20, expired, flags:
Rates: Waiting for latest...
Incoming Interface: Serial0/0:0, RPF failures 0
Outgoing Interfaces (1):
GigabitEthernet3/0
(*, 225.5.5.5), uptime 0:09:37, flags:
Rates: Waiting for latest...
Incoming Interface: GigabitEthernet3/1, RPF failures 0
Outgoing Interfaces (0):
T V IP M T
O IEW ULTICAST
Command (in SUM/CM)
show ip multicast traffic
E
XAMPLE
ALU# show ip multicast traffic
IP Multicast statistics:
Rcvd:
Sent:
Errors:
CLI Configuration Guide
Beta
M
ULTICAST
B (FIB) I
ASE
S
RAFFIC TATISTICS
4449 total, 838 link local
3334 forwarded, 0 send register
0 send assert, 3 first data pkt notice
1 rpf failure, 1 drop
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
NFORMATION
This command displays the multicast
routing table.
This command displays the statistics
of the multicast packets.
IGMP Configuration
Description
Description
569
Beta