User Mode (Um) - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

U M (UM)
SER ODE
You can start the CLI session from a console, SSH or a Telnet connection. When
you start the CLI session, you are prompted for a user name / password
combination. When you enter the user name and password correctly, you will
automatically enter the UM. If you enter an incorrect password three consecutive
times, the CLI session will be closed.
Since UM is the basic administrative level, only a limited set of commands like
basic diagnostics, monitoring commands, ping, and ssh are available. The UM
command set is a subset of the SUM command set. UM is also the starting point
for accessing the SUM command set.
U M C S
SER ODE OMMAND
Command (in UM)
clear
enable
exit
help
logout
mping
mtrace
no
nslookup
ping
quit
service
show
ssh
telnet
terminal
traceroute
CLI Configuration Guide
Beta
ET
Reset functions
Turn on privileged commands
Exit from current mode
Description of the interactive help system
Exit from the EXEC
Multicast Ping
Trace reverse multicast path from destination to
source
Negate a command or set its defaults
Translate a DNS name to an IP address or vice-
versa
Send echo messages
Quit this session
Set terminal line parameters
Show running system information
Open a SSH connection
Open a telnet connection
Set terminal line parameters
Trace route to destination
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
CLI Modes
17
Beta