Example 2; Copying Files; Example - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

E 2
XAMPLE
ALU(config) # mkdir fpkey:
Directory []? ALUtest
ALU(config) # mkdir user:
Directory []? ALUtest
C F
OPYING ILES
To copy files between different locations, use the copy command. The source can
be memory, or an external location via one of the supported protocols.
Command (in SUM)
copy <from-location> <to-
location>
E
XAMPLE
ALU# copy tftp://10.91.0.35/my-config/config running-config
The 'copy' command can also be used in an interactive mode as shown below. If
the remote file details are not given, the command prompts for the same.
ALU(config)# copy ftp: user:
Address name of remote host []? 10.91.2.87
Remote Port [ Enter for default ] :
Source Path/File []? /tmp/test_file
Username [anonymous]? admin
Password []?
Local filename []? test_file
URL specification sanity OK, proceeding with copy (please wait)
Copy successful
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
This command is used to copy files
between the two locations.
Alcatel-Lucent
The File System
Description
Beta
90