High-Level Data Link Control; Chapter Conventions - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

C 13
HAPTER
This chapter comprises the commands required to configure a High-level Data
Link Control (HDLC) encapsulation on a T1 or E1 interface or a Serial Interface
(V.35/X.21). You are required to refer to the
Serial Port (USP) Line Card"
This chapter includes a conceptual overview of HDLC and covers an introduction
of HDLC architecture with the steps involved to configure HDLC encapsulation
with the necessary commands. To get an in-depth view on the description of the
argument-list or parameters and the default values, refer to the OmniAccess 700
CLI Command Reference Guide.
This chapter is divided into the following sections:
•
"HDLC Overview"
•
"HDLC Configuration"
The "HDLC Overview"
You can skip this section, and go straight to configuration steps.
C C
HAPTER ONVENTIONS
Acronym
HDLC
ICM
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
H - D
IGH LEVEL
chapters before proceeding to this.
serves as an additional information on the HDLC protocol.

High-level Data Link Control

Interface Configuration Mode - ALU (config-interface name)#
Alcatel-Lucent
High-level Data Link Control
L C
ATA INK ONTROL
"T1E1 Line Card" and
Description
Beta
"Universal
283