Port Monitoring Configuration On Oa-700; Port Monitoring Topology - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

P M
ORT ONITORING
Figure 19: Port Monitoring Topology
P
ROCEDURE
The above topology shows that the Host A, Host B, and Host C are connected to
switchport 1/0, 1/3, and 1/1 respectively.
Switchport 1/0 is to be monitored (for both ingress and egress traffic) using
switchport 1/3. Switchport 1/3 being the monitoring port, has to receive the
mirrored data from switchport 1/0.
To configure port monitoring, the following configuration is to be used:
C P M
ONFIGURE ORT ONITORING
ALU(config)# interface switchport 1/3
ALU(config-if switchport1/3)# port monitor switchport 1/0
both
C C
HECK THE ONFIGURATION WITH THE
ALU(config)# show port monitor
PORT-MONITERING PORT-MONITERED TRAFFIC-TYPE
--------------- -------------- ------------
switchport1/3
CLI Configuration Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
C
ONFIGURATION ON
S C
HOW OMMAND
switchport1/0
Alcatel-Lucent

Port Monitoring Configuration on OA-700

OA-700
both
Beta
231