Gre Configuration Commands - Alcatel-Lucent OmniAccess 700 Cli Configuration Manual

Left running head:
Chapter name (automatic)
Generic Routing Encapsulation
GRE C
ONFIGURATION
This section details the commands that are used in configuring GRE.
T C T
O ONFIGURE A UNNEL
interface Tunnel <0-14487>
E
XAMPLE
ALU(config)# interface tunnel 7
ALU(config-if Tunnel7)#
T A
O DMINISTRATIVELY
no shutdown
shutdown
E
XAMPLE
ALU(config-if Tunnel7)# no shutdown
ALU(config-if Tunnel7)# shutdown
T C
O ONFIGURE
ip address {<ip-address
subnet-mask>|<ip-address/
prefix-length>}
E
XAMPLE
ALU(config-if Tunnel7)# ip address 20.20.20.20/24
844
Beta
C
OMMANDS
I
NTERFACE
Command (in CM)
B U /S
RING P HUTDOWN THE
Command (in ICM)
IP A T
DDRESS ON A UNNEL
Command (in ICM)
Alcatel-Lucent
Description
This command is used to create a tunnel
interface.
T I
UNNEL NTERFACE
Description
This command is used to
administratively bring up the tunnel
interface.
This command is used to
administratively bring down the tunnel
interface.
I
NTERFACE
Description
This command is used to assign an IP
address and subnet mask to the tunnel
interface.
CLI Configuration Guide
Beta