Dhcp Client Configuration Commands; Display Dhcp Client - HP 6125G Command Reference Manual

DHCP client configuration commands

The DHCP client configuration is supported only on VLAN interfaces.
When multiple VLAN interfaces having the same MAC address use DHCP for IP address acquisition via
a relay agent, the DHCP server cannot be the Windows Server 2000 or Windows Server 2003.

display dhcp client

Syntax
display dhcp client [ verbose ] [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
verbose: Specifies verbose DHCP client information to be displayed.
interface interface-type interface-number: Specifies an interface for which to display DHCP client
information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhcp client to display DHCP client information. If no interface interface-type
interface-number is specified, DHCP client information of all interfaces will be displayed.
Examples
# Display DHCP client information of all interfaces.
<Sysname> display dhcp client
Vlan-interface1 DHCP client information:
Current machine state: BOUND
Allocated IP: 40.1.1.20 255.255.255.0
Allocated lease: 259200 seconds, T1: 129600 seconds, T2: 226800 seconds
DHCP server: 40.1.1.2
# Display verbose DHCP client information.
<Sysname> display dhcp client verbose
Vlan-interface1 DHCP client information:
45