Nt6X36 In An Rlcm Fsp - Nortel DMS-100 Series Replacement Procedures

1-1034 XPM card replacement procedures
NT6X36
in an RLCM FSP
FSP Alarm and control cards
5
6
7
8
9
297-8021-547 Standard 14.02 May 2001
(continued)
NT0X91AA
card in slot
CD 3
NT0X91AE
NT6X36AA
card in slot
card in slot
CD 2
CD 1
Insert the replacement alarm and control card.
Close the FSP panel.
Tighten the slotted nut on the FSP.
Proceed as follows to reset the converter in each shelf that is controlled by
the alarm and control card you have just replaced.
Press the RESET button.
If the CONVERTER FAIL LED is
lit
not lit
The next action depends on your reason for performing this procedure.
If you were
directed to this procedure from a
maintenance procedure
Do
step 11
step 9
Do
step 10
FSP
cover