User's Manual
Once enabled, the Login Information window is displayed upon a successful login, as
shown in the example below:
4.5
Configuring Web Security Settings
The WEB Security Settings page is used to define a secure Web access communication
method. For a description of these parameters, see 'Web and Telnet Parameters' on page
513.
To define Web access security:
1.
Open the WEB Security Settings page (Configuration tab > System menu >
Management submenu > WEB Security Settings).
2.
Configure the parameters as required.
3.
Click Submit to apply your changes.
4.
To save the changes to flash memory, see 'Saving Configuration' on page 396.
Version 6.6
Figure 4-30: Login Information Window
67
4. Web-Based Management
Mediant 2000