Configuring The Internal Srv Table - AudioCodes Mediant 500L User Manual

User's Manual
DNS).
2. Click New; the following dialog box appears:
3. Configure a DNS rule according to the parameters described in the table below.
4. Click Apply.
Parameter
Index
Domain Name
domain-name
[Dns2Ip_DomainName]
First IP Address
first-ip-address
[Dns2Ip_FirstIpAddress]
Second IP Address
second-ip-address
[Dns2Ip_SecondIpAddress]
Third IP Address
third-ip-address
[Dns2Ip_ThirdIpAddress]

12.11.2 Configuring the Internal SRV Table

The Internal SRV table resolves host names to DNS A-Records. Three different A-Records
can be assigned to each host name, where each A-Record contains the host name,
priority, weight, and port.
Version 7.2
Figure 12-14: Internal DNS Table - Add Dialog Box
Table 12-19: Internal DNS Table Parameter Description
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
Defines the first IP address (in dotted-decimal format notation) to
which the host name is translated. The IP address can be
configured as an IPv4 and/or IPv6 address.
Defines the second IP address (in dotted-decimal format notation)
to which the host name is translated.
Defines the third IP address (in dotted-decimal format notation) to
which the host name is translated.
Description
167 Mediant 500L Gateway & E-SBC
12. Network