Size Sensing - Lexmark X940e Service Manual

SIZE SENSING

This setting controls whether the printer automatically registers the size of paper installed in an input source
equipped with size sensing hardware.
Input source
Multipurpose feeder (integrated MPF)
Tray 1 (integrated 520-sheet drawer)
Tray 2 (520-sheet drawer) 1TC, HCF, 3TM
Tray 3 (optional HCF 850-sheet drawer)
Tray 4 (optional HCF 1150-sheet drawer)
Tray 3 (optional 3TM 520-sheet drawer)
Tray 4 (optional 3TM 520-sheet drawer)
To change the value of this setting:
1. Touch SIZE SENSING from the Configuration Menu. The screen displays each size sensing equipped
input source and its current Size Sensing value.
SIZE SENSING
Statement/A5
?
Submit
2. Touch or
3. Touch Back to cancel and return to the Configuration Menu.
4. Touch Submit to save the change.
Turning off auto size sensing is not selectable on this machine.
Sense Statement
to scroll through the setting's other possible values.
Size sensing
Length Width

 
 


 
 
Back
7510
3-39
Diagnostic aids