Size Sensing; Panel Menus; Ppds Emulation; Factory Defaults - Lexmark 6500E Service Manual

SIZE SENSING

Automatic size sensing can be disabled or enabled in this menu. Only paper sources that support Auto Size Sensing are
displayed.
1
Select SIZE SENSING from the Configuration menu.
2
Select a tray. Only those trays with size sensing appear. Select Auto to turn size sensing on for that tray, or select
Off to disable size sensing.
3
Touch Back to exit.

Panel Menus

Disabling Panel Menus prohibits users from modifying any setting or executing any operation available in the Ready
Menu group.

PPDS Emulation

This appears only if the PPDS interpreter is available.

Factory Defaults

The customer can restore either the network settings or the base printer settings to their factory default values. When
Restore Base is selected, non-critical base printer NVRAM settings are restored. When Restore STD Net is selected, all
network NVRAM settings are restored to their factory default settings. This option is available only on models with an
integrated network adapter. When Restore LES is selected, all non-standard applications are removed and all framework
and standard application settings are reset to factory default settings.

Energy Conserve

When Energy Conserve is on, the customer does not have access to disable the Sleep Mode function. When Energy
Conserve is off, Disable appears as an additional menu item in the Sleep Mode menu. This setting only affects the values
that are displayed in the Sleep Mode menu.

Fax Low Power Support

This menu has the following settings:
•
Auto—The printer checks the Caller ID Pattern setting to determine if the fax chip should enter low power.
• Permit Sleep—The fax chip enters low power mode when needed, regardless of the Caller ID Patter setting.
•
Disable Sleep—The fax chip never enters low power mode.

Min Copy Memory

This menu lets you select the amount of memory dedicated to storing copy jobs. The values may be 25 MB, 35 MB, 50
MB, 80 MB, and 100 MB. The default is 80 MB. Values will be displayed only if the amount of installed DRAM is at least
twice the amount of the value. For example, at least 200 MB of installed DRAM is required to display the 100 MB
selection.
Service menus
43
4036