Sensor (Registration) Lag Jam - Lexmark X940e Service Manual

7510
Step
7
Check the Replace the K developer/transport drive motor
assembly for proper operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch. K developer/transport drive motor.
Does the above component operate properly?
8
Check the K developer/transport drive motor assembly for
proper connection.
Is the above component properly connected?
9 Perform a print test.
Does the error continue?

200.01 Sensor (registration) lag jam

Step
1 Check the media position.
Does the media touch the sensor (registration)?
2
Check the registration/transport roll assembly.
Is the above component free of excess wear and
contamination?
3 Check the fuser unit drive gear for excess wear and
damage.
Is the above component free of excess wear and damage?
2-40
Service Manual
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Yes
Go to step 9. Go to step 8.
Replace the K Replace the
developer / connection.
transport drive
motor assembly.
"K
Go to
developer /
transport drive
motor assembly
removal" on
page 4-96.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-80.
Yes
Remove the Go to step 2.
media.
Go to step 3. Clean or replace
the registration /
transport roll
assembly.
Go to
"Registration /
transport roll
assembly
removal" on
page
Go to step 4. Replace the fuser
unit assembly.
Go to
assembly
removal" on
page
No
No
4-36.
"Fuser unit
4-15.