Step
4
Check the sensor (registration) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Media Path.
4. Touch Registration.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
5
Check the sensor (registration) for proper connection.
Is the above component properly connected?
6
Check the sensor (fuser exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Media Path.
4. Touch Fuser exit
Caution: The area around the actuator is very hot. Allow the
fuser area to cool before proceeding.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
7
Check the sensor (fuser exit) for proper connection.
Is the above component properly connected?
8
Check the registration clutch for proper operation.
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch Registration clutch.
Does the above component make an audible clicking sound
when activated?
9
Check the registration clutch for proper connection.
Is the above component properly connected?
Check
Yes
Go to step 6.
Go to step 5.
Replace the
Replace the
sensor
connection.
(registration).
Go to
"Sensor
(registration)
removal" on
page
4-37.
Go to step 8.
Go to step 7.
Replace the
Replace the
sensor (fuser exit).
connection.
Go to
"Sensor
(fuser exit)
removal" on
page
4-25.
Go to step 10.
Go to step 9.
Replace the
Replace the
registration clutch.
connection.
Go to
"Registration
clutch removal"
on page
4-37.
Diagnostic information
7510
No
2-41