Lexmark X940e Service Manual page 758

7510
Assembly 44: Control panel and platen glass
Asm Part Units/
Index number mach
1 40X2215
2 40X2214
3 40X2213
4 40X2208
5 40X3858
6 40X4094
7 40X3863
7 40X3870
8 40X4096
9 40X2363
10 40X2364
11 40X2362
12 40X2365
13 40X3859
Warning: In the event of replacement of any one of the following components:
• RIP card assembly
• Interconnect card assembly
Only replace one component at a time. Replace the required component, and perform a POR before replacing a second
component listed above. If this procedure is not followed, the printer will be rendered inoperable. Never replace two or more
of the components listed above without a POR after installing each one, or the printer will be rendered inoperable.
Warning: Never install and remove components listed above as a method of troubleshooting components. Once a
component has been installed in a machine, it cannot be used in another machine. It must be returned to the manufacturer.
7-56
MFP Service Manual
Units/ kit
Description
or pkg
1 1 Small platen glass rear retainer
1 1 Small platen glass
1 1 Small platen glass front retainer
1 1 Large platen glass
1 1 Large platen glass retainer
1 1 Complete scanner assembly (this comes assembled)
1 1 Operator panel bezel X940e model
1 1 Operator panel bezel X945e model
1 1 Operator panel assembly (universal)
1 1 Operator panel controller card assembly
1 1 Operator panel inverter card assembly
1 1 Operator panel user touch screen
1 1 USB interface card assembly
1 1 Operator panel cable assembly