Tray Insert Message; Size Sensing; Panel Menus; Ppds Emulation - Lexmark X925 Service Manual

7541-03x

Tray Insert Message

This setting determines how many seconds the panel will display the "Tray Insert" message after a user
has inserted a tray into the printer. The values are 1 - 90 seconds.
1.
Select Tray Insert Message from the Configuration menu.
2.
Use the arrows to scroll to the desire value.
3.
Press Check to accept.
4.
Touch Back to exit.

SIZE SENSING

Automatic size sensing can be disabled or enabled in this menu. Only paper sources that support Auto Size
Sensing are displayed.
1.
Select SIZE SENSING from the Configuration menu.
2.
Select a tray. Only those trays with size sensing appear. Select Auto to turn size sensing on for that tray,
or select Off to disable size sensing.
3.
Touch Back to exit.

Panel Menus

Disabling Panel Menus prohibits users from modifying any setting or executing any operation available in the
Ready Menu group.

PPDS Emulation

This appears only if the PPDS interpreter is available.

Download Emuls

Warning: This setting should not be changed without specific instructions from the next level of support.
This setting temporarily disables downloaded emulators for troubleshooting purposes. All downloaded
emulators are re-enabled automatically after two PORs.

Demo Mode

This printer supports a demo mode that is usually used in retail environments to illustrate the features of the
printer. The printer features are illustrated by demonstration files stored in the RIP firmware, flash option, or disk
option. This mode is deactivated by default.

Factory Defaults

The customer can restore either the network settings or the base printer settings to their factory default values.
When Restore Base is selected, non-critical base printer NVRAM settings are restored. When Restore STD Net
is selected, all network NVRAM settings are restored to their factory default settings. This option is available
only on models with an integrated network adapter. When Restore LES is selected, all non-standard
applications are removed and all framework and standard application settings are reset to factory default
settings.
3-12
Service Manual